Environmental Monitoring Equipment
Uniphos offers a wide range of monitoring equipment to measure levels of pollutants in stack emissions, air and water, providing the customer a plethora of options to choose from.
Continuous Emission Monitoring System
The Uniphos CEMS is robust, well-engineered and a reliable solution for continuous measurement and monitoring of various toxic gases in industrial boiler and process stacks. It is an Online Analyzer with inbuilt diagnostics and capable of Auto/Remote calibration. Our wide range of emission monitoring analyzers provide a complete solution for stack monitoring and ensures a safe and clean environment.
Uniphos CEMS are available based on different technologies depending upon the suitability and user’s requirement:
⦁ Highly sensitive & gas specific Chemiluminescence / Fluorescence based NOx and SO2 Gas Analyzers⦁ Non-Dispersive Infrared (NDIR) based Analyzers
⦁ TDLAS based Analyzers
⦁ UV-DOAS based Analyzers
Analyzers
Uniphos Fluorescence based SO2 analyzer is a robust, reliable analyzer, tailor made for monitoring sulfur dioxide in the range of 0-100 ppm / 0-500 ppm / 0-2000 ppm.
Uniphos Chemiluminescence based NOx analyzer is an apt analyzer to measure NOx released from Boiler stacks, Thermo Pack, Furnace, Process stack etc.
NDIR gas analyzer is designed for continuous monitoring of gases like SO2, NOx, CO, CO2 and CH4 in industrial stacks.
Uniphos TDLAS based gas analyzer is a highly accurate analyzer used for the monitoring of atmospheric pollutants like HF, HCl, NH3,etc.
Uniphos Oxygen analyzer is an advanced analyzer equipped with a robust Zirconia Oxygen sensor for the monitoring of Oxygen in furnaces, incinerators, etc.
Uniphos Dust analyzer uses dynamic detection principle to measure dust or particulate matter concentration suspended in the exhaust gas passing through a duct, stack, etc.
Sample Handling System
Uniphos Peltier based sample handling system is a stack mountable sample handling system with a unique heat exchanger design which eliminates the necessity of heated sampling lines.
Uniphos membrane-based sample handling system
is tailor made for dry sample
extraction of corrosive
gas samples.
Uniphos simple probe
is a compact and
stack mountable probe
for sample extraction.
TPF Probe
Uniphos Temperature, Pressure and Flow (TPF) measurement is an easy to use, reliable probe designed to provide rapid and accurate measurement of temperature, pressure, and flow of gases in industrial stacks.
Ambient Air Quality Monitoring Systems
Ambient Air Quality Monitoring Systems
.jpg)
The Uniphos Envirotrack is an advanced, portable instrument for the measurement of pollutants like SO2, NO2, O3, NH3 and Cl2 in ambient air.
Effluent Quality Monitoring Systems
Online Instruments
.jpg)
The Uniphos Online COD Analyzer operates on the non-dispersive absorption principle to determine the Chemical Oxygen
Demand in waste / effluent
water samples.
The Uniphos Online COD Analyzer is a micro controller based online analyzer to easily determine the Chemical Oxygen Demand
in waste / effluent
water samples.
The Uniphos Online Total Cyanide Analyzer is a fully automated online analyzer designed for the continuous measurement of Total Cyanide in waste/ industrial water samples.
The Uniphos Online Ammoniacal Nitrogen Analyzer is a reliable, accurate online analyzer designed for the continuous measurement of Ammoniacal Nitrogen in process/ surface water samples.
Uniphos TSS probe with controller provides a quick, accurate, low-cost solution for real time Total Suspended Solid (TSS) monitoring in industrial wastewater, municipal water or ground water.
The Uniphos UV-VIS COD-TSS probe with controller is a reliable, low cost,
fast response analyser providing real time
measurements of COD,
BOD and TSS of
wastewater.
This rugged and portable COD analyzer enables one to easily determine the Chemical Oxygen Demand in waste / effluent water samples.
Boreal Laser Gas Detector
Boreal Laser Gas Detector
Gasfinder3-MC is an All-in-one field mountable multi-channel analyzer which can detect 2 different target gases for fast leak detection and ambient monitoring.
Stack/ Duct Probes are ideal for challenging stack monitoring applications for monitoring path lengths from 0.5m to 20m.
The OPX head is a laser based open path gas detection system ideal for line-of-sight gas detection.
